AeroBeez.com

Building Tip of the Week: EPP Aircraft Easy Repair

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! This week is a wild week with Joe Nall and RCX. We are looking forward to seeing everyone at both shows and giving everyone a close up look at all of our models including the new EPP lineup. This tip today will […]

Building Tip of the Week: Slotting CA Hinges

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! If you are not familiar with CA hinges, this tip will help you see a good way to install them and if you are familiar, we hope this helps you improve how you already install them. So without further ado, today’s tip […]

Building Tip of the Week: 4Titude Fuel Tank Mod

Good day pilots and welcome to another installment of Pete’s Tip of the Week!  In today’s tip, we will be installing a 4Titude fuel tank in place of the stock fuel tank onto our Aerobeez 65″ Yak 54 Profile ARF! These same steps can also be used on our 65″ Extra 330 Profile ARF or […]

Building Tip of the Week: Cutting the Servo Bay

Hey pilots, happy hump day and welcome back for another installment of Pete’s Tip of the Week! Today we will be looking at the servo bay and walking you through a simple way to cut out the skin while leaving a portion to seal the edge. This method helps prevent pealing of the skin and […]

BuildingTip of the Week: Installing CA Hinges

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! 2015 has been crazy busy with shows and new products, so we took a few weeks off from this series, but are happy to bring you a new tip today! If you are not familiar with CA hinges, this tip will help […]

Building Tip Of the Week: Adjusting Control Surface

Hey pilots, welcome back for our first installment of Pete’s Tip of the Week for 2015! This week has been a busy week leading up to the AMA Expo. We have been busy building our new models for the show and putting together all the final details for our new models that will be unveiled […]

Building Tip of the Week: Cowl Ventilation

Hey pilots, welcome back for our final installment of Pete’s Tip of the Week for 2014! Tonight will be a night of celebration and we hope you all ring in the New Year with friends, family, loved ones, and possibly a new build project! Today’s tip will be dealing with cowl ventilation and will hopefully […]

Building Tip of the Week: Using Zip Ties on Fuel Lines

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! Only one more day until Christmas! We are excited and hope that you all enjoy a very happy holiday with friends, family, loved ones, and possibly some new toys! Today’s tip will be dealing with fuel lines and will hopefully help give […]

Building Tip of the Week: Drilling the Propeller with a Drill JIG

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! Only one more week until Christmas! New toys, gifts, and hopefully new planes for all those pilots out there, and that means more new builds. Today’s tip will be dealing with the propeller and will hopefully help give you the extra edge […]

Building Tip of the Week: Prepping a Fuel Tank

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! We took a week off for the Thanksgiving holiday, but now we have a new tip for those December builds out there! These tips will help give you the extra edge with that next build! Even if you don’t own an Aerobeez […]

Team Aerobeez Presents: Our Week at Joe Nall 2015

Posted by aerobeez On June - 17 - 2015ADD COMMENTS

Hey everyone! If you did not know, this year was out first time at Joe Nall as a team with Team pilot Santiago Perez bringing some amazing flying to the field with the 64″ MXS-R electric conversion and the DA70 powered 93″ Extra 330! We had such a fun time over the course of the week at Joe Nall.  So many amazing planes and pilots.  We really enjoyed all the great conversations with everyone.  Looking forward to it again next year. So to recap we put together this short compilation... more

Aerobeez Customer Testimonials: Mike Griffen

Posted by aerobeez On June - 8 - 2015ADD COMMENTS

Customer Name: Mike Griffen Location: CA MARKS RC Club Feedback: “It’s a great plane. Real maneuverable, light weight. It was an ease to build. I had it fully built in two hours.” Photos:  Read More →

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! This week is a wild week with Joe Nall and RCX. We are looking forward to seeing everyone at both shows and giving everyone a close up look at all of our models including the new EPP lineup. This tip today will be focusing on the repair of and EPP hybrid aircraft with the hope that this will help you with any repairs needed on one of our EPP planes or perhaps even another EPP model you have. So without further ado, today’s... more

Aerobeez Customer Testimonials: Perry Morgan

Posted by aerobeez On May - 9 - 2015ADD COMMENTS

Customer Name: Perry Morgan Location: Oxford, Mississipi Feedback: Here’s my Aerobeez Extra 330 Profile. Aerobatics are amazing! Endless maneuvers keeps all eyes on it! Thanks for a wonderful plane at a fantastic price! Photos:    Read More →

Aerobeez Customer Testimonials: Steven Jones

Posted by aerobeez On May - 8 - 2015ADD COMMENTS

Customer Name: Steven Jones Location: FT. Lupton, Colorado Feedback: I really like the Slick 540 it does everything I wanted. I’ve bought many kits and I think this was really complete. The servos recommended are plenty, the amount of throws are more than enough. Setting up surfaces in degree’s was new but the app on my phone made it easy and more accurate I think than inches. I powered it with DLE55ra its way powerful at a half throttle it hovers and we’re at 5000 feet with... more

Aerobeez Customer Testimonials: Brian Couch

Posted by aerobeez On May - 4 - 2015ADD COMMENTS

Customer Name: Brian Couch Location: Greenville, South Carolina Feedback: Maiden flight today all I can say is thanks to my friends at Aerobeez for the awesome plane and all the help. Photos:  Read More →

Aerobeez Customer Testimonials: Tim Smith

Posted by aerobeez On May - 1 - 2015ADD COMMENTS

Customer Name: Tim Smith Location: Shelbyville, Kentucky Feedback: Had an awesome maiden flight with the 50cc Slick 540 the other day! What an outstanding 3D machine! It seriously made me feel more confident flying such a stable platform I even pulled off a knife-edge spin which I’ve only attempted on sim before!! Way to go Aerobeez!!! Photos:    Read More →

Aerobeez Customer Testimonials: Brian Cobb

Posted by aerobeez On May - 1 - 2015ADD COMMENTS

Customer Name: Brian Cobb Location: St. Augustine, Florida Feedback: Got a maiden flight in on the 20cc extra 330sc today! Thanks for a great plane, it flew awesome. Photos:  Read More →

Aerobeez Customer Testimonials: Brad Alix

Posted by aerobeez On May - 1 - 2015ADD COMMENTS

Customer Name: Brad Alix Location: San Marcos, California Feedback: Here is the 55″ in red. The EPP Edge 540. Maidened this past weekend. Flies great and for sure has a big presence in the air. Photos:  Read More →

Customer Name: Tomas Simatovic Location: Hamilton, Montana Feedback: Hey all, Tomas here! Here’s my 3rd or 4th flight on the slick! Was so distracted by the way the plane flew, I experimenting with a lot of things. I have to say I was expecting a typical large electric 3d plane sort of feel, but I was pleasantly surprised. This thing not only feels like a large 40%er, but when it comes time for quick snaps and fast roll rates, this thing really put a smile on my face. Rolls very axial and... more

Aerobeez Customer Testimonials: RJ King

Posted by aerobeez On May - 1 - 2015ADD COMMENTS

Customer Name: RJ King Location: Long Beach, California Feedback: My photo after my first flight on the Sbach 300! Photos:  Read More →

Aerobeez Customer Testimonials: Michael Town

Posted by aerobeez On May - 1 - 2015ADD COMMENTS

Customer Name: Michael Town Location: Lafayette, California Feedback: Six flights now and I just love it. My first gasser. Aerobeez Slick 540 in our pit at the Reno Air Races. Very nice model and great service. Photos:  Read More →

Aerobeez Customer Testimonials: Travis Lab

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Customer Name: Travis Lab Location: Peoria, Arizona Feedback: I’ll be at the one eighth airforce tomorrow sporting the new MXSR and my T-shirt. I did the maiden flight today and HOLY crap, nice flier, I thought the roll rate would be higher, but its so sweet flying that thing. I love Aerobeez!! Photos:  Read More →

Aerobeez Customer Testimonials: Nick Frederick

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Customer Name: Nick Frederick Location: North Royalton, Ohio Feedback: Had a great time at the flying field today with Josh E Tomsheck and Keith Pearson. I’m really liking this AeroBeez Slick!!!! ‪#‎aerobeez‬ ‪#‎hitecrcd‬ Happy 4th!!!! Photos:  Read More →

Aerobeez Customer Testimonials: Bruce Young

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Customer Name: Bruce Young Location: Rancho Palos Verdes, California Feedback: My Slick 540 had it’s maiden flight today! The plane is awesome! No trim was required! Photos: Video: // Second flight of Slick 540 – love this plane! Posted by Bruce Young on Tuesday, November 12, 2013  Read More →

Aerobeez Customer Testimonials: Warren Davidson

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Customer Name: Warren Davidson Location: Asheboro, North Carolina Feedback: Love this aerobeez edge 540 50cc! Photos:  Read More →

Aerobeez Customer Testimonials: Lance Geist

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Customer Name: Lance Geist Location: Houma, Louisiana Feedback: Just wanted to give the new Slick 540 the recognition it deserves! First flight today, and several more afterwards. Superb airplane, well done! No bad habits, rock solid in flight, crisp and nimble, flies like it’s on rails. My setup is a DLE-60 twin, Savox 0252MGs all around with 0236MG rudder servo (coupled with the Miracle rudder servo tray), Miracle dual on/off switch and fuel dot, dual 6.6v 3000mah Turnigy Nano-Tech LIFe... more

Aerobeez Customer Testimonials: Pontus Rydin

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Customer Name: Pontus Rydin Location: Burlington, Massachusetts Feedback: Going LOW and CRAZY with the EPP Sbach! Photos:  Read More →

Customer Name: Cyndi Metcalf Cougoule Location: Los Gatos, California Feedback: Purchased at AMA Expo 2014 from Pete…awesome flying airplane. Photos:  Read More →

Aerobeez Customer Testimonials: Chip Campbell

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Customer Name: Chip Campbell Location: Covington Georgia Feedback: My fleet, including 2 Aerobeez 30cc planes, my favorite the new Yak54!!! Photos:  Read More →

Aerobeez Customer Testimonials: Matt Grant

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Customer Name: Matt Grant Location: Tustin, California Feedback: Got my maiden in this weekend on my 30cc Sbach. Thank you AeroBeez’s for some great hardware and servos. Photos:  Read More →

Aerobeez Customer Testimonials: Cary Archer

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Customer Name: Cary Archer Location: Livonia, Michigan Feedback: Thank you. I participated in the KRAM IMAC Challenge with my aerobeez yak 30 cc even if my flying wasn’t up to par the plane flew great thank you for your support . Cary Archer Photos:  Read More →

Aerobeez Customer Testimonials: Andrew Westrop‎

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Customer Name: Andrew Westrop‎ Location: United Kingdom Feedback: Just thought I would say a big thanks to you guys for the wheel pants and the spinner you sent me. Got here in four days to the UK.  Well impressed with your service and will use it again and recommend you here in the U.K. Photos:  Read More →

Aerobeez Customer Testimonials: Brian Chenoweth

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Customer Name: Brian Chenoweth Location: San Diego, California Feedback: This new 55″ Edge is one of the most fun planes I’ve ever had, what a blast to fly, big presence in the air and seems to do everything well. My balsa planes may start collecting dust. You will be surprised at how great that plane is! It’s pretty much all I want to fly these days. Photos: Thank you for the kind words and for your support Brian! Team Aerobeez  Read More →

Aerobeez Customer Testimonials: Lowell Hamilton

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Customer Name: Lowell Hamilton Location: Flagstaff, Arizona Feedback: It is a super easy build, even finding my own way. Thanks for the great model! Photos: Thank you Lowell for your support!  Read More →

Building Tip of the Week: Slotting CA Hinges

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! If you are not familiar with CA hinges, this tip will help you see a good way to install them and if you are familiar, we hope this helps you improve how you already install them. So without further ado, today’s tip : Slotting CA Hinges When installing CA hinges, we like to take a hobby knife and open up the slots for each hinge. This is not always necessary, but it is a good habit to get into as it will clear the... more

Aerobeez Edge540 55″ EPP Hybrid ARF Build Log Step 2 Remove the EPP foam cut outs on the bottom of the fuselage. These are precut and can be simply pressed out. These holes are pre-cut for electronics cooling. Step 4 Install the carbon landing gear with the screws provided in the hardware bag. Step 7 Remove the pieces as seen in these photos for the inserting of the horizontal stabilizer. DO NOT DISCARD the back piece! This will be glued back once the horizontal stabilizer and elevator... more

Slick540 38” EPP Hybrid Step By Step Build Log and Guide Step 2 Once your wheel and wheel pant are in position, glue the EPP cover to the wheel pant using CA or rubber contact cement. Step 4 Glue on the landing gear EPP fairings, two pieces per side. You will apply glue to one side and basically sandwich the landing gear strut. CA or rubber cement will be the glue of choice. Step 5 Remove the pre-cut EPP areas on the fuselage. You may remove all the areas as seen here or remove them as you... more

Aerobeez 93″ Extra 330 Step By Step Build Guide

Posted by aerobeez On April - 2 - 2015ADD COMMENTS

Step 2 Notice the angle of the carbon fiber main landing gear. The leading edge will be straight (pointing towards the nose of the Extra) and the trailing edge will be tapered (pointing towards the tail of the Extra.) Step 7 Use blue thread lock on the wheel collar set screws and install the wheels onto the axles. You will use 2 wheels collars per side. If you are experiencing a tight fit in getting the wheel collar onto the axle, check the inside wall of the wheel collar. There may be residual... more

The Aerobeez 2015 EPP ARF Lineup is Now Here

Posted by aerobeez On March - 21 - 2015ADD COMMENTS

Happy Friday to all the readers, flyers, and builders out there! The Aerobeez NEW 2015 EPP ARF Lineup is now here! You may have seen them at the AMA show in January, or caught a glimpse of them at the AEF, but now you can check out the finished product. We have gone through months of testing and development on our new models and created some really beautiful color schemes to show off these awesome 3D trainer EPP models! So without further ado, check them out for yourself, and we hope you like what... more

Pete and Santiago takes you for a fun flight with our 2015 SlickPro! This Slick is currently our team pilots favorite airframe! Amazing wide range of flight characteristic! 3D Huck or sport flying with crisp snap rolls and rock solid harriers! Enjoy the flight review! Some of Santiago’s points of emphasis on the model are the light weight build and build quality. Extremely light Strong frame with Carbon Fiber reinforcement Excellent aerobatic and 3D flight character   Santiago’s... more

NEW Flying Wing for 2015 In Development

Posted by aerobeez On March - 5 - 2015ADD COMMENTS

Hey everyone! What a great couple months 2015 has started off to. We have brought in our new lineup of planes and had great feedback from people at AMA and AEF with other shows lined up later this year. We have also been busy working on other new developments for one of the smaller EPP models that everyone enjoyed last year, the Aerobeez Flying Wings! We have been working with our factory to produce an improved version two of our 32″ Angry Bee and the 32″ Stinger. The designs you see... more

Building Tip of the Week: 4Titude Fuel Tank Mod

Posted by aerobeez On February - 25 - 2015ADD COMMENTS

Good day pilots and welcome to another installment of Pete’s Tip of the Week!  In today’s tip, we will be installing a 4Titude fuel tank in place of the stock fuel tank onto our Aerobeez 65″ Yak 54 Profile ARF! These same steps can also be used on our 65″ Extra 330 Profile ARF or other profile planes with some minor modifications to the process. Step 1:  Insert the long zip tie into the slots where you will be mounting the fuel tank. (this tip works great for the stock fuel... more

Aerobeez VIP Ticket 55″ Edge EPP Giveaway!

Posted by aerobeez On February - 20 - 2015ADD COMMENTS

Hey all you Aerobeez pilots, builders, and fans! Only a few more weeks until our brand NEW 2015 EPP line-up arrives. We are really excited about our two new color versions of the 48″ Extra 330SC as well as our two new models that will be joining the 2015 line-up, the 55″ EDGE 540 and the 38″ Slick 540! Both of these new models will also come in two colors. We have shown off the Yellow and Black model Edge 540 at AMA and at AEF, but there will also be a Red version! To honor the... more

Aerobeez 65″ Yak 54 Profile Step By Step Build Guide

Posted by aerobeez On February - 19 - 2015ADD COMMENTS

Yak-54 Profile Build Log Then, with a sharp hobby knife, cut away the covering for your ignition location. On the right side of the fuselage, cut away the first area in front of the main wing tube, the throttle servo slot  and the two holes directly below the throttle servo for the carbon fiber landing gear mount.  Now, locate the components to build your landing gear so that we can get this Yak on her wheels! Notice the plastic spacer is on the inside of the wheel.  The wheel collar on the... more

Building Tip of the Week: Cutting the Servo Bay

Posted by aerobeez On February - 12 - 2015ADD COMMENTS

Hey pilots, happy hump day and welcome back for another installment of Pete’s Tip of the Week! Today we will be looking at the servo bay and walking you through a simple way to cut out the skin while leaving a portion to seal the edge. This method helps prevent pealing of the skin and creates a nice clean finish. So without further ado, today’s tip : Cutting the Servo Bay When cutting out a whole in the skin for the servos, it is a good habit to leave roughly 1/8 to 1/12 of covering. This... more

BuildingTip of the Week: Installing CA Hinges

Posted by aerobeez On February - 5 - 2015ADD COMMENTS

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! 2015 has been crazy busy with shows and new products, so we took a few weeks off from this series, but are happy to bring you a new tip today! If you are not familiar with CA hinges, this tip will help you see a good way to install them and if you are familiar, we hope this helps you improve how you already install them. So without further ado, today’s tip : Installing CA Hinges When installing CA hinges, we prefer... more

Aerobeez 70″ Slick PRO Step By Step Build Guide

Posted by aerobeez On January - 30 - 2015ADD COMMENTS

Aerobeez 70 “Slick Pro Build Manual Hello Aerobeez pilots and fans More Fan More Fan More Fan and welcome to Our official Step by Step build guide and manual for the 70 “Slick Pro Electric ARF kit . This manual Will Walk you through the Steps to building Our Slick Pro and Are in the order That we prefer to build. Build order is a recommendation, but it is also personal preference, so if you have experience with building and prefer to work with certain areas first or in a different order,... more

Aerobeez at the Arizona Electric Fest 2015

Posted by aerobeez On January - 29 - 2015ADD COMMENTS

Hey all you pilots out there! This past weekend was a long and busy one, but AEF 2015 brought smiles from pilots and spectators alike. This four day event hosted pilots from all around the world and some of the coolest electric aircraft around. As the Arizona sun breaks the horizon, pilots are prepping and getting ready to take to the skies. Team Aerobeez was present with Team Pilots, Pete, Santiago, and Tomas, ready to show our awesome 2015 aircraft line. Here you can see Pete and Santiago taking... more

Maiden Day with the 70″ Slick Pro Electric

Posted by aerobeez On January - 24 - 2015ADD COMMENTS

Hey friends and fans! What a great week this has been, but we have been supper busy with preparing for the Arizona Electric Fest. Before we head out to the show we were able to get the New 70″ Slick Pro up in the air for our maiden flight. It was a cold and foggy day, but we got some great pictures of the slick in action. This plane flies so smooth! Pete had it locked in and ready to hover right away. Pete Bringing the Slick Pro in for another hover!  Read More →

AMA Expo Pictures and Re-Cap

Posted by aerobeez On January - 14 - 2015ADD COMMENTS

Hello Aerobeez friends and fans! This past week we attended the 2015 AMA Expo, and boy was it a great show! This was our 3rd year in a row attending the show and this year we got some great feedback. This week, instead of posting up a new Build Blog or Tip of the Week, we will re-cap some of what went on at the show and show off some of the pictures we took while we were there. Here is a look at our plane display at the 2015 AMA Expo AEROBEEZ Booth at 2015 AMA EXPO The five new planes that we had... more

Building Tip Of the Week: Adjusting Control Surface

Posted by aerobeez On January - 8 - 2015ADD COMMENTS

Hey pilots, welcome back for our first installment of Pete’s Tip of the Week for 2015! This week has been a busy week leading up to the AMA Expo. We have been busy building our new models for the show and putting together all the final details for our new models that will be unveiled on the 9th at AMA. With so much building going on in such a short period of time, we wanted to share a simple tip to help get your control surfaces just right. Even if you don’t own an Aerobeez plane or have yet... more

Building Tip of the Week: Cowl Ventilation

Posted by aerobeez On December - 31 - 2014ADD COMMENTS

Hey pilots, welcome back for our final installment of Pete’s Tip of the Week for 2014! Tonight will be a night of celebration and we hope you all ring in the New Year with friends, family, loved ones, and possibly a new build project! Today’s tip will be dealing with cowl ventilation and will hopefully help give you the extra edge with that next build! Even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot, we want to help you improve your model... more

Building Tip of the Week: Using Zip Ties on Fuel Lines

Posted by aerobeez On December - 24 - 2014ADD COMMENTS

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! Only one more day until Christmas! We are excited and hope that you all enjoy a very happy holiday with friends, family, loved ones, and possibly some new toys! Today’s tip will be dealing with fuel lines and will hopefully help give you the extra edge with that next build! Even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot, we want to help you improve your model... more

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! Only one more week until Christmas! New toys, gifts, and hopefully new planes for all those pilots out there, and that means more new builds. Today’s tip will be dealing with the propeller and will hopefully help give you the extra edge with that next build! Even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot, we want to help you improve your model building, set-up,... more

Building Tip of the Week: Prepping a Fuel Tank

Posted by aerobeez On December - 10 - 2014ADD COMMENTS

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! We took a week off for the Thanksgiving holiday, but now we have a new tip for those December builds out there! These tips will help give you the extra edge with that next build! Even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot, we want to help you improve your model building, set-up, and eventually flying skills. So without further ado, today’s tip will focus on: Prepping... more

Aerobeez 89″ Sbach 300 Step By Step Build Guide

Posted by aerobeez On December - 3 - 2014ADD COMMENTS

89″ Aerobeez Sbach300 Build Log Step 5 Using blue thread lock on the wheel pant screws and install the fiberglass wheel pants to the carbon landing gear.  Note:  The “blind” nuts are preinstalled in the fiberglass wheel pants. Step 6 Adjust the wheel collars to center your wheel in each wheel pant and tighten the collars. Step 9 Before we install the tail gear assembly, we will install the rudder to the vertical stabilizer.  Use a drop of household oil in each of the... more

Building Tip of the Week: Applying Decals

Posted by aerobeez On November - 26 - 2014ADD COMMENTS

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! With Thanksgiving only a day away and Christmas just around the corner, there are likely some model building days in store! These tips are just the thing you need to help with that next build! Intended to help with all types of model building, these tips will help take your building to the next level. Even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot, we want to help... more

Building Tip of the Week: Engine Stand Off Set-Up

Posted by aerobeez On November - 20 - 2014ADD COMMENTS

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! Gearing up for the festive holidays and prepping a new build during the cold winter ahead? These tips are just the thing you need to help with that next build! Intended to help with all types of model building, these tips will help take your building to the next level. Even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot, we want to help you improve your model building,... more

Flying Wing Step by Step Build Guide Pro Set-Up

Posted by aerobeez On November - 13 - 2014ADD COMMENTS

Hello pilots and builders and welcome back to another installment of our Step By Step Build Guide series! In this build log, Pete will show the different methods that can be used in building the Aerobeez fun wings. This is a modified Pro Set-Up that shows off some of the ways that you could improve or mod the basic set-up. Certain parts that come with the receiver ready kit will not be used to save weight and improve performance. These flying wings are completely customizable to your own preference. So,... more

About Me

Stationed in California, we are a developer and distributor of RC plane products. Our mission is to get more people to enjoy the fun hobby of RC flying by offering good quality RC planes at an affordable price. Our company is formed by a group of airplane enthusiasts who love to be around airplanes. We carry the products we like and we want to offer them at a reasonable cost so hopefully more people will enjoy them as much as we do. We believe in good customer service. We want to provide the necessary support to our customers so they can start to enjoy our great products in the shortest time possible. As we are constantly looking for ways to improve our products and service, we love to hear from you. Please feel free to give us your feedbacks and suggestions.

Web Site: www.aerobeez.com
Email: support@aerobeez.com
Phone: 877-813-5337






Follow Me on Pinterest