Aerobeez 88″ 30% MXS-R 50cc Gas Airplane

Posted by aerobeez On July - 12 - 2012

Photo by: Mark G.

The MXS-R is one of the newer exciting aerobats in the market.  It is gaining much of popularity due to its new unique design. The original full scale MXS-R was featured in Redbull air race series. And was flown by renowned pilots such as Nigel Lamb and  late Alejandro Macclean.  The MXS-R was a successful aerobatic plane for being fast, light, and aerodynamic efficient.  This is due to the fact that the whole body was made of composite material, which allows it to have a much more aerodynamic body shape than one that’s made of aluminum.  Also, because the body is molded into shape. There aren’t any rivets on the body which are seen on other “metal” planes.  As a result, the MXS-R also has a beautiful shape and form.  We have always wanted to carry the RC version of this wonderful plane.

Aerobeez is carrying the 30% 50cc MXS-R in black berry color scheme.


Wing Span: 88″
Length: 83″
Wing Area: 1178 sq in
Fly Weight: 15-16 lbs



Powerplant: DLE 55 with 22x 10 Acro prop (23 x 8 would also be good)

Servos: 5 x Servos (at least 13 kg-cm torque) for all control surface, 1 x standard servos for throttle control.

TX/RX: 7-8 channel

Battery: single 7.4 V 3000mAH battery with iBEC or two 7.4V 1500 mAH batteries

Switch: Miracle single switch with built in fuel dot

Spinner: 3.5″ Carbon Fiber spinner

The Aerobeez 30% MXS-R comes in a beautiful color scheme after the full scale version.  The wing design follows the full scale design which has extended tip on the wing tip and wing root. Also, the aileron runs across the wing span to give the pilot more authority in roll control. Note that all control surfaces are pre-hinged as a standard quick build feature.  They are digitally measured to ensure proper fitment.  It takes lots of time off from measuring and cutting slots for the hinges.  All you would need to do is to apply glue on the hinge connectors and connect the control surfaces to the wings.  As a standard feature for Aerobeez gas airplanes, the wings are connected through a strong carbon fiber wing tube.

The hinges provide more than 60 degrees in control throws to allow for the most extreme aerobatic set up.

The elevator is a two-piece design which allows for easy install and removal for transit and replacement. They are also pre-hinged and connected through a piece of strong carbon fiber tube.


The cowl and wheel pants are pre-painted to match the color scheme of the airframe. Note that there is a built in cowl ring for installation.  This would seal the mounting screws from the outside for a much nicer appearance.

The Aerobeez MXS-R comes with upgraded hardware such as fiber glass control horns, pull-pull rudder assembly, high quality ball linkages, heavy duty fiber glass long servo arms, and servo extension connector straps.

As another upgraded feature, the Aerobeez 30% MXS-R comes with high quality carbon fiber landing gear and tail wheel bracket.  The wheels are made of high quality polyurethane.  All hardwares for the landing gear assemblies included.

A gas safe fuel tank assembly is included in the package for a complete installation.

If you are looking for a great aerobatic airplane with unique and nice design in 50cc size, place the 30% MXS-R on your list of choice.  It is beautiful and realistic looking. And it provides superior aerobatic performances.  It would do an amazing job in both IMAC or 3D flying.  It would be really hard not to notice it if there is one in the field.




Leave a Reply

Web Site:
Phone: 877-813-5337

Follow Me on Pinterest