AeroBeez.com

Archive for the ‘Build Guide’ Category

Aerobeez 78″ Extra 330 Raiden Electric Build Guide Hey Everyone! Welcome to our Step By Step ELECTRIC build log for the NEW 78″ Extra 330 Raiden. We have our Step-By-Step GAS build guide as well as the Electric Motor/ESC Install, but we want to walk you through the full process of building this model for Electric. We put alot of effort into R&D on this model and used both our experience with the prototype and feedback from our loyal fans to deliver one of the most stunning 3D monsters... more

Aerobeez 78″ Extra 330 Raiden Electric Motor Install & Setup Hey Everyone! Welcome to our Electric Motor Install for the 78″ Extra 330 Raiden. This guide is intened to suppliment our Step By Step build log for the NEW 78″ Extra 330 Raiden. We have put alot of effort into R&D on this model and used both our experience with the prototype and feedback from our loyal fans to deliver one of the most stunning 3D monsters this year for our 35-55c class. Setup Motor: DM-5327... more

Aerobeez 105″ Extra 330 Reaper Step by Step Build Log Hey everyone! Welcome to the Step by Step build log for the NEW 105″ Extra 330 Reaper! We have put a lot of research and development into this kit. With customer feedback on existing models as well as our own experience with the prototypes to help develop our first 105″ model, this model is packed with what has become the Aerobeez standard. We also cut down build time in many areas by pre-hinging, pre-building, or pre-plumbing.... more

Aerobeez 78″ Extra 330 Raiden Build Log

Posted by aerobeez On September - 7 - 2016ADD COMMENTS

Aerobeez 78″ Extra 330 Raiden Build Log Hey Everyone! Welcome to our Step By Step build log for the NEW 78″ Extra 330 Raiden. We have put alot of effort into R&D on this model and used both our experience with the prototype and feedback from our loyal fans to deliver one of the most stunning 3D monsters this year for our 35-55c class. Like previous models, you will notice that the 78″ Raiden has been pre-hinged on all surface areas with exception to the rudder. This helps... more

Aerobeez 2016 Slick 540 48″ Mini Banshee EPP Hybrid ARF Build Log  Hey there pilots and welcome to our Step By Step Build guide for the NEW 2016 48″ Slick 540 EPP Hybrid! This model shares many of the same build qualities as the 48″ extra and the 55″ Edge, only now it is all on our new Slick 540 design with the Banshee scheme! Because of this, the build steps will be very familure to our other EPP models and we are happy to help walk you through each step for the Mini Banshee.... more

Aerobeez 32″ Edge 540 EPP Foamie Build Log

Posted by aerobeez On August - 23 - 2016ADD COMMENTS

32″ Edge 540 EPP Foamy Build Log Hey Everyone! Welcome to the official build log for the NEW Aerobeez 32″ Edge 540 EPP Foamy ARF Kit!  This build log is put together by our Team Pilot Orel and will follow his specific setup and steps. Orel’s Setup will be: Motor: Turnigy 2204-14t ESC: Turnigy 12amp esc Prop: GWS 8×4.3 Battery: TP 325mah 3s Servos: Hitec HS-56 for Ailerons & Futaba s3114 on tail NOTE: (Orel ordered HS-45s to use but they did not come in time for the build) Recommendations... more

Aerobeez 55″ Slick 540 Full Fuse EPP Build Log

Posted by aerobeez On August - 18 - 2016ADD COMMENTS

Aerobeez 2016 Slick 540 55″ EPP Hybrid ARF Build Log  Hey there pilots and welcome to our Step By Step Build guide for the NEW 2016 55″ Slick 540 EPP Hybrid! Like last years “55 Edge, the NEW 55” Slick 540 EPP Hybrid is one of the easiest and most straight forward build ARF’s ever and we are happy to help walk you through each step. This build guide is compiled from Bloosee’s official build log. In this build log, we will take you step by step in building your... more

Aerobeez 78″ Slick 540 Typhoon Build Log

Posted by aerobeez On March - 1 - 2016ADD COMMENTS

A few things to note before moving on. This plane comes pre-hinged with the exception of the rudder (like most kits this size). We know that some pilots prefer to hinge the plane as people have been concerned about throw, but all we can assure you, that is not the case here. Our factory has done a great job hinging those models and allowing our customers no limitation regarding deflection. We test all surfaces at about 65 degrees or greater on all surfaces. With that being said, let’s get started... more

Aerobeez 65″ 20cc Extra 330sc Manual Next install your axle onto your landing gear. The order should be nut, washer, carbon fiber landing gear, wheel pant, white plastic washer, wheel, collar. (Note: REMEMBER TO USE LOCTITE!) Tail wheel assembly is already installed so just screw into center of the tail. (Note: I recommend to remove all screws and apply loctite.) Now you will cut out the slot for the horn on the aileron Now you can install you horn and wipe off the excess epoxy with paper... more

Aerobeez 91″ Slick 540 Step By Step Build Guide

Posted by aerobeez On November - 20 - 2015ADD COMMENTS

Aerobeez 91” Slick Manual Hey there pilots and builders alike, welcome to our official Step by Step build guide and manual for the 91″ Slick 540 Banshee ARF kit! This manual will walk you through the steps to building our NEW Slick 540. First we will start with installing the landing gear. locate the screws needed for the landing gear (remember to use locktite!)   next we will install the landing gear cover, this can be done by using CA or epoxy. After installing the landing gear... more

Aerobeez 64″ MXS-R Build Manual Hello to all you builders and flyers out there, and welcome to our official Step by Step build guide and manual for the 64″ MXS-R ARF kit. This manual will walk you through the steps to building our MXS-R. Our MXS-R can be flown with either electric set ups or gas/nitro engines. First we will start with the wing assembly. Our MXS-R comes with CA hinges on every surface. Make sure when gluing the hinges to use thin CA on both sides of the hinge to get a... more

Aerobeez Edge540 55″ EPP Hybrid ARF Build Log Step 2 Remove the EPP foam cut outs on the bottom of the fuselage. These are precut and can be simply pressed out. These holes are pre-cut for electronics cooling. Step 4 Install the carbon landing gear with the screws provided in the hardware bag. Step 7 Remove the pieces as seen in these photos for the inserting of the horizontal stabilizer. DO NOT DISCARD the back piece! This will be glued back once the horizontal stabilizer and elevator... more

Slick540 38” EPP Hybrid Step By Step Build Log and Guide Step 2 Once your wheel and wheel pant are in position, glue the EPP cover to the wheel pant using CA or rubber contact cement. Step 4 Glue on the landing gear EPP fairings, two pieces per side. You will apply glue to one side and basically sandwich the landing gear strut. CA or rubber cement will be the glue of choice. Step 5 Remove the pre-cut EPP areas on the fuselage. You may remove all the areas as seen here or remove them as you... more

Aerobeez 93″ Extra 330 Step By Step Build Guide

Posted by aerobeez On April - 2 - 2015ADD COMMENTS

Step 2 Notice the angle of the carbon fiber main landing gear. The leading edge will be straight (pointing towards the nose of the Extra) and the trailing edge will be tapered (pointing towards the tail of the Extra.) Step 7 Use blue thread lock on the wheel collar set screws and install the wheels onto the axles. You will use 2 wheels collars per side. If you are experiencing a tight fit in getting the wheel collar onto the axle, check the inside wall of the wheel collar. There may be residual... more

Pete and Santiago takes you for a fun flight with our 2015 SlickPro! This Slick is currently our team pilots favorite airframe! Amazing wide range of flight characteristic! 3D Huck or sport flying with crisp snap rolls and rock solid harriers! Enjoy the flight review! Some of Santiago’s points of emphasis on the model are the light weight build and build quality. Extremely light Strong frame with Carbon Fiber reinforcement Excellent aerobatic and 3D flight character   Santiago’s... more

NEW Flying Wing for 2015 In Development

Posted by aerobeez On March - 5 - 2015ADD COMMENTS

Hey everyone! What a great couple months 2015 has started off to. We have brought in our new lineup of planes and had great feedback from people at AMA and AEF with other shows lined up later this year. We have also been busy working on other new developments for one of the smaller EPP models that everyone enjoyed last year, the Aerobeez Flying Wings! We have been working with our factory to produce an improved version two of our 32″ Angry Bee and the 32″ Stinger. The designs you see... more

Aerobeez 65″ Yak 54 Profile Step By Step Build Guide

Posted by aerobeez On February - 19 - 2015ADD COMMENTS

Yak-54 Profile Build Log Then, with a sharp hobby knife, cut away the covering for your ignition location. On the right side of the fuselage, cut away the first area in front of the main wing tube, the throttle servo slot  and the two holes directly below the throttle servo for the carbon fiber landing gear mount.  Now, locate the components to build your landing gear so that we can get this Yak on her wheels! Notice the plastic spacer is on the inside of the wheel.  The wheel collar on the... more

Aerobeez 70″ Slick PRO Step By Step Build Guide

Posted by aerobeez On January - 30 - 2015ADD COMMENTS

Aerobeez 70 “Slick Pro Build Manual Hello Aerobeez pilots and fans More Fan More Fan More Fan and welcome to Our official Step by Step build guide and manual for the 70 “Slick Pro Electric ARF kit . This manual Will Walk you through the Steps to building Our Slick Pro and Are in the order That we prefer to build. Build order is a recommendation, but it is also personal preference, so if you have experience with building and prefer to work with certain areas first or in a different order,... more

Aerobeez 89″ Sbach 300 Step By Step Build Guide

Posted by aerobeez On December - 3 - 2014ADD COMMENTS

89″ Aerobeez Sbach300 Build Log Step 5 Using blue thread lock on the wheel pant screws and install the fiberglass wheel pants to the carbon landing gear.  Note:  The “blind” nuts are preinstalled in the fiberglass wheel pants. Step 6 Adjust the wheel collars to center your wheel in each wheel pant and tighten the collars. Step 9 Before we install the tail gear assembly, we will install the rudder to the vertical stabilizer.  Use a drop of household oil in each of the... more

Flying Wing Step by Step Build Guide Pro Set-Up

Posted by aerobeez On November - 13 - 2014ADD COMMENTS

Hello pilots and builders and welcome back to another installment of our Step By Step Build Guide series! In this build log, Pete will show the different methods that can be used in building the Aerobeez fun wings. This is a modified Pro Set-Up that shows off some of the ways that you could improve or mod the basic set-up. Certain parts that come with the receiver ready kit will not be used to save weight and improve performance. These flying wings are completely customizable to your own preference. So,... more

Aerobeez 89″ Yak 55 Step by Step Build Guide

Posted by aerobeez On October - 29 - 2014ADD COMMENTS

Hi Pilots!  Welcome to our hands on Step by Step Aerobeez 30% YAK-55 build blog!  This is a Pro build by our team pilot Santiago Perez.  As always having experience with putting an ARF together is good, but with our guide even an inexperienced builder should be able to put this kit together in about 10-12 hours. Look for “Pro Tip’s” that are unique tricks and tips called out by Santiago Perez and our notes that will help walk you through this build like a seasoned pro. These... more

Aerobeez 71″ Extra 330 Step by Step Build Guide

Posted by aerobeez On October - 2 - 2014ADD COMMENTS

Hello Aerobeez Pilots and welcome to our 71″ Extra 330 Build Guide! As with our previous build guides this guide will walk you through step by step as you build your new 71″ Extra 330 ARF Kit. Having experience with putting an ARF together is good, but with our guide even an inexperienced builder should be able to put this kit together in about 10-12 hours. Look for “Pete’s Tip’s” and our notes that will help walk you through this build like a seasoned pro.  This... more

Hello Aerobeez Pilots and welcome to our Aerobeez 20cc Sbach Profile installment of the Step by Step Build Guide series.  This build log will provide the steps that our team pilot, Pete, uses for this build.  You can cross reference with the included manual on the CD disc at anytime.  Also we will include Pete’s Pro Tips for certain steps that will help along the way.  Please keep in mind with this Sbach Profile, certain steps may be changed for your personal build preference and equipment... more

Building Tip of the Week: Wicking the Motor Box

Posted by aerobeez On August - 27 - 2014ADD COMMENTS

Hello Aerobeez Pilots! Welcome to the our 3rd installment of Pete’s Tip of the Week. These tips will help with all types of model building, even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot. The intention is to help you improve your model building, set-up, and eventually flying skills. So without further ado, today’s tip will focus on: Wicking the Motor Box. This tip will significantly assists in the overall strength of the motor box and any... more

Building Tip of the Week: Nut and Bolt Installation

Posted by aerobeez On August - 13 - 2014ADD COMMENTS

Hello Aerobeez Pilots! Welcome to the another installment of Pete’s Tip of the Week. These tips will help with all types of model building, even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot. The intention is to help you improve your model building, set-up, and eventually flying skills. So without further ado, today’s tip will focus on: Nut and Bolt Installation. When you are trying to install nuts in various areas where it is difficult... more

Aerobeez 73″ Sbach 300 Step by Step Build Guide

Posted by aerobeez On July - 23 - 2014ADD COMMENTS

Hello Aerobeez Pilots and welcome to our 73″ Sbach 300 Build Guide! Like the previous two articles this build guide will walk you through step by step as you build your new 73″ Sbach 300 ARF Kit. Having experience with putting any ARF together is good, but with our guide even an inexperienced builder should be able to put this kit together in about 10-12 hours. Look for “Pete’s Tip’s” and our notes that will help walk you through this build like a seasoned pro.... more

Aerobeez 74″ Slick 540 Step by Step Build Guide

Posted by aerobeez On July - 15 - 2014ADD COMMENTS

Hello Aerobeez Pilots and welcome back! In this article we will walk you through step by step as you build your new 74″ Slick 540 ARF Kit. If you have experience with putting any ARF together, this build should take you about 10-12 hours to finish. Even if this is your first ARF build, our tips and tricks will help walk you through like a seasoned pro. Here is what the 74″ Slick 540 will look like once complete! Step 1.2:  Locate the landing gears, wheel pants, and landing gear axles... more

Aerobeez 73″ Yak 54 Step-By-Step Build Guide

Posted by aerobeez On July - 9 - 2014ADD COMMENTS

Hello Aerobeez Pilots and welcome to our 73″ 25% Yak 54 build guide. In this article we will walk you through step by step as you build your new 73″ Yak 54 ARF Kit. If you have experience with putting any ARF together, this build should take you about 10-12 hours to finish. Here is what the 73″ Yak 54 will look like once complete! Note: The rudder gap and hinges once glued should look like the example image shown here. Step 2.5:  Install the tail wheel assembly.  Note:  For... more

Web Site: www.aerobeez.com
Email: support@aerobeez.com
Phone: 877-813-5337






Follow Me on Pinterest