AeroBeez.com

64″ Electric Conversion MXS-R Shown At Joe Nall

Posted by aerobeez On August - 3 - 2015ADD COMMENTS

    Hey everyone! Our 64″ MXS-R that was released earlier this year has recently gotten some much deserved attention and one of our pilots has managed to put together an Electric conversion of the model. This model was designed for a 20cc gas motor, but converting to electric is a really nice way to go for this size.   Specs: Wing Span: 64 in (1625 mm) Length: 59 in (1500 mm) Wing Area: 776.55 sq. in (50.1 sq. dm) Fly Weight: 8.16-8.82 lbs (3700-4000g)   Electric Build: Motor:... more

Team Aerobeez Presents: Our Week at Joe Nall 2015

Posted by aerobeez On June - 17 - 2015ADD COMMENTS

Hey everyone! If you did not know, this year was out first time at Joe Nall as a team with Team pilot Santiago Perez bringing some amazing flying to the field with the 64″ MXS-R electric conversion and the DA70 powered 93″ Extra 330! We had such a fun time over the course of the week at Joe Nall.  So many amazing planes and pilots.  We really enjoyed all the great conversations with everyone.  Looking forward to it again next year. So to recap we put together this short compilation... more

AMA Expo Pictures and Re-Cap

Posted by aerobeez On January - 14 - 2015ADD COMMENTS

Hello Aerobeez friends and fans! This past week we attended the 2015 AMA Expo, and boy was it a great show! This was our 3rd year in a row attending the show and this year we got some great feedback. This week, instead of posting up a new Build Blog or Tip of the Week, we will re-cap some of what went on at the show and show off some of the pictures we took while we were there. Here is a look at our plane display at the 2015 AMA Expo AEROBEEZ Booth at 2015 AMA EXPO The five new planes that we had... more

Aerobeez 89″ Yak 55 Step by Step Build Guide

Posted by aerobeez On October - 29 - 2014ADD COMMENTS

Hi Pilots!  Welcome to our hands on Step by Step Aerobeez 30% YAK-55 build blog!  This is a Pro build by our team pilot Santiago Perez.  As always having experience with putting an ARF together is good, but with our guide even an inexperienced builder should be able to put this kit together in about 10-12 hours. Look for “Pro Tip’s” that are unique tricks and tips called out by Santiago Perez and our notes that will help walk you through this build like a seasoned pro. These... more

Building Tip of the Week: Wicking the Motor Box

Posted by aerobeez On August - 27 - 2014ADD COMMENTS

Hello Aerobeez Pilots! Welcome to the our 3rd installment of Pete’s Tip of the Week. These tips will help with all types of model building, even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot. The intention is to help you improve your model building, set-up, and eventually flying skills. So without further ado, today’s tip will focus on: Wicking the Motor Box. This tip will significantly assists in the overall strength of the motor box and any... more

Building Tip of the Week: Nut and Bolt Installation

Posted by aerobeez On August - 13 - 2014ADD COMMENTS

Hello Aerobeez Pilots! Welcome to the another installment of Pete’s Tip of the Week. These tips will help with all types of model building, even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot. The intention is to help you improve your model building, set-up, and eventually flying skills. So without further ado, today’s tip will focus on: Nut and Bolt Installation. When you are trying to install nuts in various areas where it is difficult... more

Building Tip of the Week: Blue Thread Lock

Posted by aerobeez On August - 6 - 2014ADD COMMENTS

Hello Aerobeez Pilots! Welcome to the first installment of Pete’s Tip of the Week. Even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot, these tips will help you improve your model building, set-up, and eventually flying skills. So without further ado, today’s tip will focus on: Blue Thread Lock. Always try to use Blue thread lock on all the machine screws when a “lock nut” is not being used on the opposing side.  Blue... more

Maiden Day of our new 30% Slick540!

Posted by Pete On October - 16 - 2013ADD COMMENTS

The day started actually the night before with me prepping the new Aerobeez Slick 540.  Tuning and making sure all the programming is correct, checking and checking again all the screws, bolts, and fasteners.  You can never be too safe with a giant scale airplane!  I am building this Slick 540 to be HUCKED!  Checking all the XQ Power servos for correct travel amounts and setting all my rates/expos for the Miracle Arms.  Time to go to bed… can’t sleep!  Visions of torque rolls, pop... more

Web Site: www.aerobeez.com
Email: support@aerobeez.com
Phone: 877-813-5337






Follow Me on Pinterest