AeroBeez.com

Aerobeez 64″ MXS-R Build Manual Hello to all you builders and flyers out there, and welcome to our official Step by Step build guide and manual for the 64″ MXS-R ARF kit. This manual will walk you through the steps to building our MXS-R. Our MXS-R can be flown with either electric set ups or gas/nitro engines. First we will start with the wing assembly. Our MXS-R comes with CA hinges on every surface. Make sure when gluing the hinges to use thin CA on both sides of the hinge to get a... more

Aerobeez 93″ Extra 330 Step By Step Build Guide

Posted by aerobeez On April - 2 - 2015ADD COMMENTS

Step 2 Notice the angle of the carbon fiber main landing gear. The leading edge will be straight (pointing towards the nose of the Extra) and the trailing edge will be tapered (pointing towards the tail of the Extra.) Step 7 Use blue thread lock on the wheel collar set screws and install the wheels onto the axles. You will use 2 wheels collars per side. If you are experiencing a tight fit in getting the wheel collar onto the axle, check the inside wall of the wheel collar. There may be residual... more

Aerobeez 70″ Slick PRO Step By Step Build Guide

Posted by aerobeez On January - 30 - 2015ADD COMMENTS

Aerobeez 70 “Slick Pro Build Manual Hello Aerobeez pilots and fans More Fan More Fan More Fan and welcome to Our official Step by Step build guide and manual for the 70 “Slick Pro Electric ARF kit . This manual Will Walk you through the Steps to building Our Slick Pro and Are in the order That we prefer to build. Build order is a recommendation, but it is also personal preference, so if you have experience with building and prefer to work with certain areas first or in a different order,... more

AMA Expo Pictures and Re-Cap

Posted by aerobeez On January - 14 - 2015ADD COMMENTS

Hello Aerobeez friends and fans! This past week we attended the 2015 AMA Expo, and boy was it a great show! This was our 3rd year in a row attending the show and this year we got some great feedback. This week, instead of posting up a new Build Blog or Tip of the Week, we will re-cap some of what went on at the show and show off some of the pictures we took while we were there. Here is a look at our plane display at the 2015 AMA Expo AEROBEEZ Booth at 2015 AMA EXPO The five new planes that we had... more

Aerobeez 71″ Extra 330 Step by Step Build Guide

Posted by aerobeez On October - 2 - 2014ADD COMMENTS

Hello Aerobeez Pilots and welcome to our 71″ Extra 330 Build Guide! As with our previous build guides this guide will walk you through step by step as you build your new 71″ Extra 330 ARF Kit. Having experience with putting an ARF together is good, but with our guide even an inexperienced builder should be able to put this kit together in about 10-12 hours. Look for “Pete’s Tip’s” and our notes that will help walk you through this build like a seasoned pro.  This... more

Building Tip of the Week: Wicking the Motor Box

Posted by aerobeez On August - 27 - 2014ADD COMMENTS

Hello Aerobeez Pilots! Welcome to the our 3rd installment of Pete’s Tip of the Week. These tips will help with all types of model building, even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot. The intention is to help you improve your model building, set-up, and eventually flying skills. So without further ado, today’s tip will focus on: Wicking the Motor Box. This tip will significantly assists in the overall strength of the motor box and any... more

Building Tip of the Week: Nut and Bolt Installation

Posted by aerobeez On August - 13 - 2014ADD COMMENTS

Hello Aerobeez Pilots! Welcome to the another installment of Pete’s Tip of the Week. These tips will help with all types of model building, even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot. The intention is to help you improve your model building, set-up, and eventually flying skills. So without further ado, today’s tip will focus on: Nut and Bolt Installation. When you are trying to install nuts in various areas where it is difficult... more

Building Tip of the Week: Blue Thread Lock

Posted by aerobeez On August - 6 - 2014ADD COMMENTS

Hello Aerobeez Pilots! Welcome to the first installment of Pete’s Tip of the Week. Even if you don’t own an Aerobeez plane or have yet to take the first step into becoming an RC pilot, these tips will help you improve your model building, set-up, and eventually flying skills. So without further ado, today’s tip will focus on: Blue Thread Lock. Always try to use Blue thread lock on all the machine screws when a “lock nut” is not being used on the opposing side.  Blue... more

We are excited to introduce our first flying wings–Angry Bee and Stinger.  Each color scheme has two versions–Push Prop & EDF.  In this build review, we are going to go over how to put together the push prop version. And we are using the Angry Bee for this build. This kit is so easy to put together, since the motor box is already assembled. And the servos slots are already cut out. If you are a fast builder, it would only take you 1 hour (including the time for the glue to set)... more

Web Site: www.aerobeez.com
Email: support@aerobeez.com
Phone: 877-813-5337






Follow Me on Pinterest