AeroBeez.com

Building Tip of the Week: Slotting CA Hinges

Posted by aerobeez On April - 30 - 2015ADD COMMENTS

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! If you are not familiar with CA hinges, this tip will help you see a good way to install them and if you are familiar, we hope this helps you improve how you already install them. So without further ado, today’s tip : Slotting CA Hinges When installing CA hinges, we like to take a hobby knife and open up the slots for each hinge. This is not always necessary, but it is a good habit to get into as it will clear the... more

Building Tip of the Week: 4Titude Fuel Tank Mod

Posted by aerobeez On February - 25 - 2015ADD COMMENTS

Good day pilots and welcome to another installment of Pete’s Tip of the Week!  In today’s tip, we will be installing a 4Titude fuel tank in place of the stock fuel tank onto our Aerobeez 65″ Yak 54 Profile ARF! These same steps can also be used on our 65″ Extra 330 Profile ARF or other profile planes with some minor modifications to the process. Step 1:  Insert the long zip tie into the slots where you will be mounting the fuel tank. (this tip works great for the stock fuel... more

Building Tip of the Week: Cutting the Servo Bay

Posted by aerobeez On February - 12 - 2015ADD COMMENTS

Hey pilots, happy hump day and welcome back for another installment of Pete’s Tip of the Week! Today we will be looking at the servo bay and walking you through a simple way to cut out the skin while leaving a portion to seal the edge. This method helps prevent pealing of the skin and creates a nice clean finish. So without further ado, today’s tip : Cutting the Servo Bay When cutting out a whole in the skin for the servos, it is a good habit to leave roughly 1/8 to 1/12 of covering. This... more

BuildingTip of the Week: Installing CA Hinges

Posted by aerobeez On February - 5 - 2015ADD COMMENTS

Hey pilots, welcome back for another installment of Pete’s Tip of the Week! 2015 has been crazy busy with shows and new products, so we took a few weeks off from this series, but are happy to bring you a new tip today! If you are not familiar with CA hinges, this tip will help you see a good way to install them and if you are familiar, we hope this helps you improve how you already install them. So without further ado, today’s tip : Installing CA Hinges When installing CA hinges, we prefer... more

Building Tip Of the Week: Adjusting Control Surface

Posted by aerobeez On January - 8 - 2015ADD COMMENTS

Hey pilots, welcome back for our first installment of Pete’s Tip of the Week for 2015! This week has been a busy week leading up to the AMA Expo. We have been busy building our new models for the show and putting together all the final details for our new models that will be unveiled on the 9th at AMA. With so much building going on in such a short period of time, we wanted to share a simple tip to help get your control surfaces just right. Even if you don’t own an Aerobeez plane or have yet... more

Web Site: www.aerobeez.com
Email: support@aerobeez.com
Phone: 877-813-5337






Follow Me on Pinterest