AeroBeez.com

Hey everyone and welcome to our new build guide for the limited edition 64″ MXS-R in Matte White, Red, and Black color scheme. This Step by Step build is brought to you by our Aerobeez Team member Brian Chenoweth! This model is built for 20cc gas engine, but for this build Brian has decided to go with an electric set-up. Set-Up: Motrofly 4320-450kv (2200 watts) Hobbywing platinum 100A (swapped out the Gecko 85A) Three standard servos for ailerons and rudder Two mini servos for the elevators Falcon... more

Aerobeez 78″ Extra 330 Raiden Electric Build Guide Hey Everyone! Welcome to our Step By Step ELECTRIC build log for the NEW 78″ Extra 330 Raiden. We have our Step-By-Step GAS build guide as well as the Electric Motor/ESC Install, but we want to walk you through the full process of building this model for Electric. We put alot of effort into R&D on this model and used both our experience with the prototype and feedback from our loyal fans to deliver one of the most stunning 3D monsters... more

Aerobeez 78″ Extra 330 Raiden Electric Motor Install & Setup Hey Everyone! Welcome to our Electric Motor Install for the 78″ Extra 330 Raiden. This guide is intened to suppliment our Step By Step build log for the NEW 78″ Extra 330 Raiden. We have put alot of effort into R&D on this model and used both our experience with the prototype and feedback from our loyal fans to deliver one of the most stunning 3D monsters this year for our 35-55c class. Setup Motor: DM-5327... more

Aerobeez 105″ Extra 330 Reaper Step by Step Build Log Hey everyone! Welcome to the Step by Step build log for the NEW 105″ Extra 330 Reaper! We have put a lot of research and development into this kit. With customer feedback on existing models as well as our own experience with the prototypes to help develop our first 105″ model, this model is packed with what has become the Aerobeez standard. We also cut down build time in many areas by pre-hinging, pre-building, or pre-plumbing.... more

Aerobeez 78″ Extra 330 Raiden Build Log

Posted by aerobeez On September - 7 - 2016ADD COMMENTS

Aerobeez 78″ Extra 330 Raiden Build Log Hey Everyone! Welcome to our Step By Step build log for the NEW 78″ Extra 330 Raiden. We have put a lot of effort into R&D on this model and used both our experience with the prototype and feedback from our loyal fans to deliver one of the most stunning 3D monsters this year for our 35-55c class. Like previous models, you will notice that the 78″ Raiden has been pre-hinged on all surface areas with exception to the rudder. This helps... more

Aerobeez 78″ Slick 540 Typhoon Build Log

Posted by aerobeez On March - 1 - 2016ADD COMMENTS

A few things to note before moving on. This plane comes pre-hinged with the exception of the rudder (like most kits this size). We know that some pilots prefer to hinge the plane as people have been concerned about throw, but all we can assure you, that is not the case here. Our factory has done a great job hinging those models and allowing our customers no limitation regarding deflection. We test all surfaces at about 65 degrees or greater on all surfaces. With that being said, let’s get started... more

Aerobeez 91″ Slick 540 Step By Step Build Guide

Posted by aerobeez On November - 20 - 2015ADD COMMENTS

Aerobeez 91” Slick Manual Hey there pilots and builders alike, welcome to our official Step by Step build guide and manual for the 91″ Slick 540 Banshee ARF kit! This manual will walk you through the steps to building our NEW Slick 540. First we will start with installing the landing gear. locate the screws needed for the landing gear (remember to use locktite!)   next we will install the landing gear cover, this can be done by using CA or epoxy. After installing the landing gear... more

Aerobeez 64″ MXS-R Build Manual Hello to all you builders and flyers out there, and welcome to our official Step by Step build guide and manual for the 64″ MXS-R ARF kit. This manual will walk you through the steps to building our MXS-R. Our MXS-R can be flown with either electric set ups or gas/nitro engines. First we will start with the wing assembly. Our MXS-R comes with CA hinges on every surface. Make sure when gluing the hinges to use thin CA on both sides of the hinge to get a... more

Flying Wing Step by Step Build Guide Pro Set-Up

Posted by aerobeez On November - 13 - 2014ADD COMMENTS

Hello pilots and builders and welcome back to another installment of our Step By Step Build Guide series! In this build log, Pete will show the different methods that can be used in building the Aerobeez fun wings. This is a modified Pro Set-Up that shows off some of the ways that you could improve or mod the basic set-up. Certain parts that come with the receiver ready kit will not be used to save weight and improve performance. These flying wings are completely customizable to your own preference. So,... more

Web Site: www.aerobeez.com
Email: support@aerobeez.com
Phone: 877-813-5337






Follow Me on Pinterest