AeroBeez.com

Aerobeez 78″ Slick 540 Typhoon Build Log

Posted by aerobeez On March - 1 - 2016ADD COMMENTS

A few things to note before moving on. This plane comes pre-hinged with the exception of the rudder (like most kits this size). We know that some pilots prefer to hinge the plane as people have been concerned about throw, but all we can assure you, that is not the case here. Our factory has done a great job hinging those models and allowing our customers no limitation regarding deflection. We test all surfaces at about 65 degrees or greater on all surfaces. With that being said, let’s get started... more

Aerobeez 91″ Slick 540 Step By Step Build Guide

Posted by aerobeez On November - 20 - 2015ADD COMMENTS

Aerobeez 91” Slick Manual Hey there pilots and builders alike, welcome to our official Step by Step build guide and manual for the 91″ Slick 540 Banshee ARF kit! This manual will walk you through the steps to building our NEW Slick 540. First we will start with installing the landing gear. locate the screws needed for the landing gear (remember to use locktite!)   next we will install the landing gear cover, this can be done by using CA or epoxy. After installing the landing gear... more

Aerobeez 74″ Slick 540 Step by Step Build Guide

Posted by aerobeez On July - 15 - 2014ADD COMMENTS

Hello Aerobeez Pilots and welcome back! In this article we will walk you through step by step as you build your new 74″ Slick 540 ARF Kit. If you have experience with putting any ARF together, this build should take you about 10-12 hours to finish. Even if this is your first ARF build, our tips and tricks will help walk you through like a seasoned pro. Here is what the 74″ Slick 540 will look like once complete! Step 1.2:  Locate the landing gears, wheel pants, and landing gear axles... more

I started one morning with the intent of a complete build of my Aerobeez 26% Slick 540 ARF and maiden the next day! Keep in mind this ARF includes all the hardware and a plumbed ready fuel tank! As I took the parts and components out of the box, I noticed the attention to detail in where each airframe piece was placed and taped in the box. Everything was super secure and the main box was very thick. I laid out my basic build tools a cup of coffee and my build begins. So super excited to get the... more

Maiden Day for the new 30-35cc Slick540!

Posted by Pete On November - 4 - 2013ADD COMMENTS

Got to the field early morning around 8:30.  Couldn’t sleep much the night before as I was so super excited about the maiden flight.  I’m sure all you pilots know the feeling!  The day was overcast and chilly as I assembled the Slick540 with main wings.  Let’s back track a bit.  The morning starts off with me forgetting something at my workshop.  As I pulled into the field, I had to turn around and go home to pick up an important part I forgot.  Now back to the ready to control... more

Maiden Day of our new 30% Slick540!

Posted by Pete On October - 16 - 2013ADD COMMENTS

The day started actually the night before with me prepping the new Aerobeez Slick 540.  Tuning and making sure all the programming is correct, checking and checking again all the screws, bolts, and fasteners.  You can never be too safe with a giant scale airplane!  I am building this Slick 540 to be HUCKED!  Checking all the XQ Power servos for correct travel amounts and setting all my rates/expos for the Miracle Arms.  Time to go to bed… can’t sleep!  Visions of torque rolls, pop... more

This time we are going to talk about the new Aerobeez 30% Slick 540.  The 30% Slick 540 is one of the new 30% scale lines Aerobeez carries, along with the Edge 540, and Sbach 342. The Slick 540 is such an elegant airplane and we have expected so much performance and quality in it. It was definitely worth the wait. We were all very pleased with the outcome. Specifications: Wing Span: 87″ Length: 83″ Wing Area: 1426 sq in Fly Weight: 15-17 lbs Flying video: Powerplant: DLE 55 with 22x... more

Web Site: www.aerobeez.com
Email: support@aerobeez.com
Phone: 877-813-5337






Follow Me on Pinterest